How can we help?

This appliance is a standard efficiency non-condensing combi boiler. This means it heats water when you draw a tap. It doesn't need a water storage tank or a cylinder because the boiler is connected directly to the water mains, heating water as its needed.

This boiler was first manufactured in 2002 and is not currently in production. It is a Natural Gas, LPG, Condensing and wall mounted boiler.

The CI is compatible with a broad range of third-party roomstats and clocks. It is NOT compatible with our advanced eBUS connected controls such as the MiGo. For more information on roomstats you can contact an approved installer by clicking here. 

 

 

For full instructions please refer to the relevant clock installation manual available in the literature section below.

Your boiler should work reliably for a number of years if it is serviced annually, however occasionally  faults can occur. In a lot of cases faults can be temporary and if the boiler is reset it will start working again. We have created a special troubleshooting guide which you can access by clicking here which may help you resolve the issue. If you continue to experience problems please click here for contact information.

If you are a suitably qualified Gas Safe registered Engineer you can access our comprehensive technical help section by clicking here.